How to Build a Shower Pan & Install a Tile Floor – HomeAdvisor

Bathtub and shower in new luxury home
Whether you ’ re a weekend warrior purpose on doing it yourself, or researching your options before hiring a professional, one thing you need to know is this : At the heart of every gorgeously tiled shower is a hardy shower pan. This custom-made pan provides the necessary base over which to lay tile. While prefabricate pans are faster and easier to install, if you want to use tile alternatively of an acrylic or fiberglass enclosure, you need this bespoke choice. This is necessary for lastingness, style, and indeed the pan is the exact size and shape for your new shower .
This project typically takes at least two to four days, and costs anywhere from $200 to DIY, up to $1,000 or more for professional installation. Building a customs pan provides a handcraft attend. It besides gives you the ability to choose any tile pattern, color, or fabric you want.

On This Page:

tile shower base

Preparing for the Project

The primary finish of the shower basis is to create a spill floor angled toward the enfeeble so the waste water flows efficiently into the pipes. The base needs to have a drain, an edge frame, and tiles for the cosmetic complete .

Materials and Tools Needed

Some of the basics required include :

Materials Tools
Preblended dry mortar (a mix of sand and cement) or ceramic floor mix Hammer
Waterproofing barrier Wet saw
Two 2-inch by 4-inch by 8-foot lumber board Electric screwdriver
Several 1/2-inch by 2-inch by 7-foot boards Tape measure
Thin-set mortar Protractor
Tile Pencil
Tile spacers Disposable paint brush
Bullnose tile/shower curb tile Notched trowel
Grout Sanding block
Caulk Level
2-inch pipe Small foam roller
Shower drain Bucket
4-inch screws Rags
1-inch nails Mask

Choosing Your Tile

Picking out the tile is the first dance step. It besides makes it far easier to determine the dimensions of the entire space once you know the size of the tile you ’ ll be working with .
When you ’ re choosing your floor tile, there are respective significant factors to consider. First, remember that the floor is a besotted environment. Build it to be vitamin a unassailable as possible, starting with your tile choice. Look for tile designed for submersion or manipulation in pools. additionally, look for something with a slip resistance military rank of A or B .
Mosaics are popular designs because they work well on the squelch surface, and they feature adequate grout lines to minimize slippage .

Prices of Popular Tiles
Material Avg Cost Per Sq Ft
Ceramic $1 – $6
Porcelain $2 – $8
Natural Stone $3 – $12
Marble $10 – $12
Glass $15 – $20
Ready to start your Tile Shower Floor Installation?

Find Pros
Return To Top
tile shower

Steps for Building & Installation

There are respective options for building a custom base. Pre-sloped pans made for using with tile eliminates the indigence to mud or calculate the proper slope for drain. lone a few companies make these foam or plastic trays, so they may be difficult to find. The more traditional method involves building a shower pan frame, pouring mud into it and waterproofing the area before adding tile. This project will by and large takes a full week to complete, including the time needed to allow the mire to dry. This guide is based on this traditional method .

Building the Frame

Framing out the base can be crafty. Although it ’ s potential to DIY, if you ’ re not experienced with this type of influence, consult a pro for help oneself with the construction .

  1. Determine the size and shape of your shower. Use 1-inch by 2-inch boards to represent where the doors and panels will go, taping them down before marking the floor to note the curb, which should be between 3 and 4 inches wide.
  2. Mark and cut the 2-inch by 4-inch boards to the size of the frame, using the protractor to mark the angles needed for the outer and inner frame.
  3. Assemble the wooden frame of the base, with inner and outer edges of the curb.
  4. Remove the taped down 1-inch by 2-inch boards, cut them and nail them to secure the frame in place.
  5. Drill screws into the bare floor between the inner and outer curb edges every foot or so and at every joint. This will later help join the curb to the floor.

Mixing & Pouring the Pan

  1. Mix the mud according to manufacturer instructions.
  2. Pour it into the curb frame until the mud reaches the top of the wood frame, making the top as level as you can.
  3. Wait 24 hours before removing the frame and scraping the newly set mud smooth with a drywall knife.
  4. Use a level to make sure the top is level, using a sander as needed to create perfectly level lines.
  5. The top of the drain should be 2 inches above floor height, and you want to mark the walls and curb to a height 2 3/4 inches above the floor as a guide to the amount of mud you need to maintain a 3/4-inch slope.
  6. Pour mud into the shower pan, mixing it with a trowel as you go to get rid of air bubbles.
  7. Use the level to make sure all sides of the pan slope toward the drain.
  8. Wait three days for the mud to dry and cure before waterproofing it.
  9. Paint over the entire pan, including corners, nooks and the perimeter with a liquid waterproofing product.
  10. Allow the first coat to dry, and then apply a second one. No one wants to have to repair bathroom leaks, and this is additional insurance against potential moisture damage later.

Plumbing & Drain Considerations

Most shower drains are designed to use with 2-inch pipes. If you ’ re converting from a tub or if you ’ re plainly uncertain whether to use 1.5-inch or 2-inch pipes, go with the larger choice. This allows water to drain faster, minimizing the risk of flood .
popular enfeeble types are made from cast cast-iron, PVC or ABS. They have an integrated flange that gets bolted to the pan ’ mho waterproof lining. even if you choose to do the stay of the stick out on your own, hiring a pro to work on the bathymetry and drain initiation can ensure that all the connections are leak-proof .

Ready to start your Tile Shower Floor Installation?

Find Pros
Return To Top
laying tiles on floor

Installing Your Tiles

  1. Take all your measurements, and do a dry run to lay the tiles out before getting started. Lay the tiles down on a dry surface to see where you need to make cuts and how everything fits together.
  2. Cut the tiles and dry fit them again to ensure a snug fit.
  3. Right before you’re ready, wipe the concrete shower pan with a damp sponge to remove any remaining dust, which could prevent the thinset from adhering.
  4. Smooth thinset on the concrete to create a 1/8-inch thick layer. Use the notched edge drag a second, thinner layer on before smoothing it lightly with the flat edge. Place the tiles, let them sit for a few minutes and lightly wipe the thinset away from the joints.
  5. Use a tile nipper to shape the tiles around the drain.
  6. Mix the grout, apply it with a rubber float, let it dry for a few minutes before wiping the grout off the tiles’ surface.
Ready to start your Tile Shower Floor Installation?

Find Pros
Return To Top

Waterproofing, Caulking & Sealing

once the tiles are set and the grout has dried according to manufacturer recommendations, caulk around the drain ’ s circumference and create a unassailable seal. additionally, you ’ ll need to caulk around corners and anywhere the tile meets another surface. For exemplar, where the floor meets the restrict and where the floor meets the walls .
Wait until the caulk dries before adding grout sealant. At this point, your shower al-qaeda should be perfectly waterproofed and ready to use .
Waterproof foam-filled cement board installed to waterproof shower area

Removal & Replacement

If you ’ re refinishing an existing shower or switching from a bathtub to a shower, you ’ ll need to remove the existing social organization before getting started. To do so :

  1. Remove the drain cover and place a clean towel or rag into the drain before chiseling along the grout line of the center tiles.
  2. Use a 3-pound sledgehammer to hammer the tile until it’s dislodged. Continue chiseling down to the waterproofing membrane.
  3. Slip a flatbar into that hole and under the mortar bed before prying upward to destroy the entire floor.
  4. Remove the debris and sweep the area before moving on to installing the base.
Ready to start your Tile Shower Floor Installation?

Find Pros
Return To Top

DIY Considerations

For the DIY minded, there are a few tips and tricks to make things go smooth. For example :

  • Plan, plan, plan! Take all the time you need in the beginning stages of the project for fewer surprises and headaches later.
  • Gear up for comfort: Get a set of knee pads to make working on the floor more comfortable and a mask to avoid inhaling concrete dust.
  • Measure and cut: Measure and mark tiles before cutting them. Use a carborundum stone to smooth sharp edges.
  • There’s an order to everything: In most cases, tile work goes as follows – ceilings before walls and walls before floors.

Although this is a accomplishable DIY stick out, it can be overwhelm, peculiarly if you don ’ t have a set of experience or the proper equipment. If it all becomes excessively much, connect with a local professional to get some help in completing the work .
Return To Top

reservoir :
Category : How To

Related Posts

Leave a Reply

Your email address will not be published.