How to Texture a Wall

If bare, paint walls do n’t fit into your sense of style and your imagination for your indoor outer space, there are a numeral of ways to add texture and nuance to enliven your rooms. Whether it ‘s using wallpaper, textured paint, joint intensify or a fake ending, the end result of textured walls is well worth the attempt .

Hang Wallpaper

Textured wallpaper in dining room
Wallpaper might be the most park and dim-witted way to add texture to walls. Textured wallpaper has its own built-in feel and design. With sol many different styles and colors available, it can be tailored to match existing décor in a room or used to create a new design you have in mind. It can besides be painted, if even more customization is desired. An advantage of wallpaper is that it hides wall imperfections, which means you don ’ t have to repaint regularly to hide scrapes, marks and dings. For wax details about how to install wallpaper, see the project How to Hang Wallpaper .

Make Textured Paint

You can add texture to your walls using textured paint. Using paint in this room can give you more options than the basic shell, satin or compressed sheens. alternatively, you may choose from stone, sand, fake finish up or original textures. Textured paint is thoroughly for hiding blemishes that a flat or satin shininess might show. You can buy textured rouge pre-mixed or you can buy packages of powderize texture additive or sand ( formulated for mixing with paint ) to add to standard paint, such as True Value EasyCare Ultra Premium Interior Paint. note : texture additives can be added to both latex paint and oil paints.

Helpful Tips

buying powdered additive is convenient because you can mix the right amount of texturing agent you need for the particular problem and effect you ’ re going for .
Some pre-mixed textured paints are designed for use on both walls and ceilings, but some are designed specifically for one or the other. Check the software to make indisputable you ’ re buy the product you need .

Step 1: Prep the Room

Move furniture out of the room or cover it with drop cloths. besides cover the shock to protect it from paint spills and secure the cloths to the floor using painter ’ mho tape. Mask carpentry that you don ’ thyroxine want ruined by key dab. Remove fixtures, switch plates, etc., or mask them .

Step 2: Mix Paint and Texture

Pour paint into a large rouge mix container about ½ full. lento pour in the additive while mixing together with a desegregate stick. Try to add a half cup of the additive at a time until you reach the consistency you ’ rhenium looking for .

Step 3: Prime the Wall

For best results, apply True Value EasyCare Ultra Premium Interior Primer/Sealer with a brush or curler, starting at the exceed and painting in a “ W ”, “ X ” or “ N ” traffic pattern and then fill in the spaces. Continue this until you are at the buttocks of the wall. once you reach the bottom load your roller with flat coat and starting at the top roll all the way to the bed then go back following to where you just rolled and roll to the bottom again. This should be done until all of the area you had good primed has been rolled in the same commission. Let it dry thoroughly .

Safety Alert!

Open the windows to make certain you ‘ll be priming and painting in a well-ventilated sphere .

Step 4: Paint

next, apply your texture/paint mix with the same proficiency you used with the fuse. As you ’ re painting, look closely at the results and ensure that your desire texture effect is successful. If the texture international relations and security network ’ deoxythymidine monophosphate coarse enough for your tastes, add more texture additive to your paint and startle over. If it ’ s besides much, you may need to start a new concoction of paint and texture to get the impression you want .

Apply Joint Compound

Textured wall in bedroom
You ’ re credibly familiar with textured ceilings ; a similar effect can be created on your walls with joint compound, besides known as “ wallboard mud ” .

Step 1: Prep the Wall

Clean the walls with a sponge, water and balmy detergent. Let them dry. Move furniture out of the room or cover it with drop cloths. besides cover the floor to protect it from any joint intensify that might spill on it and secure the cloths to the floor using cougar ’ sulfur videotape ( you ’ ll be laying the compound on fairly slurred and it can easily drop off the wallboard tongue ) .
Remove fixtures, interchange plates, etc., or mask them and any carpentry that you do n’t want ruined by drops of compound or paint with painter ‘s tape .

Helpful Tip

You can besides leave these protective measures in put for when you begin to paint the walls in Step 5 .

Step 2: Prepare the Compound

purchase a large quantity of joint colonial, either ready-to-use or dry mix. The exact amount will vary, depending on how much rampart square footage you plan on covering. But you will need to buy in bulk, then get at least a 12-lb. pail of ready-to-use compound or 18-lb. bulge of dry mix colonial. If you will be mixing your compound, you will besides need a boastfully bucket in which to mix the compound with water. Follow the manufacturer ’ s directions when mixing the compound to prepare it .

Step 3: Begin Application of “Mud”

Start applying the compound to the wall using a 10 ” wallboard knife, beginning in corners, along baseboards or at the top of the wall and function inwards in minor sections. Coat the wall with a layer of compound at about a 1/8 ” to a ¼ ” in depth. If you want a rough effect you can go thick, you just want to try and be equally consistent as possible in the depth. It doesn ’ t have to be arrant as you ’ re going for a textured appearance, but you don ’ t want big hills or valleys on the open. Working in small sections ( 3 ’ x 3 ’ ) allows you to take your prison term adding the desire texture consequence. Keep a smaller wallboard tongue ( 4 ” to 5 ” ) handy for applying mud to tighter spaces .

Step 4: Add Texture

There are any number of ways to create the texture you want. You can use combs and brushes to create striations, sponges to create swirls or mottle, stencils, or even your fingers to make your design. Practice on a scrap piece of wallboard to test your blueprint and then you don ’ t end up with undesired results. finish texturing your 3 ’ x 3 ’ section of wall and then apply compound to the adjacent wall surface in the same dimensions. Add texture and then repeat the serve until you ’ ve covered the integral wall. Let the compound dry for the duration of time recommended by the manufacturer.

Helpful Tip

You can use sandpaper to remove any undesirable ridges or projections from besides much joint compound. Use a fine-grit paper to smooth down defects. Sand lightly so that you don ’ t mar your design .

Step 5: Paint the Wall

Apply True Value EasyCare Ultra Premium Interior Paint with a brush or roller, starting at the top and painting in a “ W ”, “ X ” or “ N ” pattern and then fill in the spaces. Continue this until you are at the bottomland of the wall. once you reach the bottomland warhead your roller with key and starting at the top roller all the way to the bottom then go back following to where you merely rolled and peal to the bottom again. This should be done until all of the area you had fair painted has been rolled in the same steering. This ensures full hide and lastingness from your rouge speculate. Let it dry thoroughly. Add a second base coat if any of the wall underneath is still showing. For best results use a roller overlay with a thick nap so that paint efficaciously makes it into all nooks and crannies on the textured open .

Apply Faux Finish

Faux finish in living room
You can use a sponge paint or rag rolling to create texture on apparent walls. Rag wheel is done by using a twist or bunched up rag to roll paint on or pull it off irregularly, creating a dappled effect for a custom look that is all your own. Using a sponge to dab paint on a coat provides a exchangeable but unique effect. Follow the steps below to do it correctly .

Step 1: Paint a Base Coat

Using a paintbrush or curler, apply a coat of True Value EasyCare Ultra Premium Interior Paint in shell coating in a color of your choice. Allow the wall to dry wholly for at least 24 hours before painting a new coat. Let the second coat dry for at least 24 hours american samoa well before the future step .

Step 2: Start Rolling or Sponging

You will need a few clean linen or lint-free cotton cloths or rags, or a sea sponge ( they provide a more irregular, natural appearance than celluloid sponges ). For torment roll, decide which method you want to use : wheel on or rolling off. Each of them provides different variations of the same texture. Rolling off normally means less of the basis coat will show through, compared to rolling on the key. Rolling off besides normally requires more rags because they finally become saturated with key and discontinue to provide the craved effect. Choose a modest parcel of the wall to use as a screen area to see which method works best for you. You can constantly paint over what you ‘ve done .
For the adjacent coat, use a slenderly dark shade of the lapp discolor paint you used as your base coating or frailty versa, if you want the base coat to be darker than the top coat .

Helpful Tip

For better results, try diluting the paint for the following coat by mixing it with water in a paint tray. Aim for getting the concoction at a proportion of 2:1 ( paint to water ) .
If you ‘re rolling on the paint, dip your rag into a paint tray to cover it with paint. Be careful not to over-saturate the fabric. Twist it or bunch it up into a ball to distribute paint evenly throughout and then roll the cloth down the rampart with firm pressure, starting at the exceed. Try not to use the like downward stroke each meter or the results may be besides consistent ; you want to use slightly angled, different strokes, re-adjusting as you move along the wall. Keep extra rags handy, as once one becomes besides saturated with paint, you ‘ll need a new one because it wo n’t work in the lapp room. Do this across the stallion airfoil of the wall until you ‘ve covered it wholly .
When rolling off the key, apply the following coating of paint over the base coat with a roller or paintbrush. then, immediately begin rolling a clean distorted or bunched up rag down the wall. The clean rag will pick up paint from where you just painted, creating the textured appearance .

Helpful Tip

Do belittled areas at a time so that the exceed coat does n’t dry before you begin rolling .
once the ragtime has become completely impregnate with paint, discard it and use another. Keep applying paint and rolling it off in downward strokes across the coat of the rampart until you ‘ve covered it .
If you ’ re using sponges, soak a sponge with paint and then dab it on the surface to create random textures on top of the basecoat. For a consistent appearance, make certain your dab overlap each other. To get maximal texture, sporadically re-wet the leech .
View more articles on cosmetic paint techniques today !

Safety Alerts!

tire rubber eraser gloves when tease rolling or sponge painting to avoid overexposure of skin to paint.

Open the windows to make sure you ‘ll be priming and painting in a well-ventilated area .
Congrats ! now you know a few ways to “ texture-ize ” your walls to add your own personal refer to your interiors .

Project Shopping List

here ’ s what you ’ ll need to complete this project successfully .

Related Posts

Leave a Reply

Your email address will not be published.