MATERIALS AND TOOLS Available on Amazon
– Stainless steel start removal compound ( for example, Bar Keeper ’ s Friend )
– Microfiber cloths
– Stainless steel scribble removal kit out
HOW TO REMOVE FINE SCRATCHES IN STAINLESS STEEL
Use a non-abrasive compound such as Bar Keeper ’ s Friend or Revere Stainless Steel and Copper Cleaner. ( In a emergency, you can tied use whitening toothpaste ) .
- If you’re using a powdered stainless steel scratch removal compound, add enough water—a few drops at a time—to create a paste roughly the consistency of toothpaste. If your compound of choice is cream-based, proceed to the next step.
- Apply a small amount of the scratch remover compound to a microfiber cloth and then very gently rub it back and forth over the scratch, working in the direction of the metal’s grain. Continue until the scratch buffs out.
- Gently wipe the surface with a fresh, barely damp microfiber cloth to remove any compound residue. Dry with another fresh microfiber cloth. Repeat Steps 2 and 3 if needed to completely remove scratches from stainless steel surfaces.
HOW TO REMOVE DEEPER SCRATCHES IN STAINLESS STEEL
For larger imperfections that can not do not respond to the intensify, use a stainless steel boodle removal kit out such as Scratch-B-Gone or Siege Stainless Steel Sink and Cookware Scratch Remover. Scratch remover kits generally contain a polish compound and a jell of harsh pads. You ’ ll work from the coarsest grit to the finest to remove scratches from the stainless sword and restore the airfoil. Be indisputable to follow the manufacturer ’ s directions specific to your kit.
- Read through the manufacturer’s instructions completely. Identify the direction of the grain in your stainless steel.
- Starting with the appropriate grit pad recommended for the specific scratch you aim to banish, rub the scratch with the grain, in one direction only—going back and forth with an abrasive could cause unattractive circular marks. Use only as much pressure as is needed to remove the scratch; don’t be overzealous or go deeper than necessary.
- Move to a smoother grit pad, if recommended by the manufacturer, and continue the buffing process, adding water, or any compounds included in the kit, as called for.
- Wipe the surface down with a microfiber cloth to finish the process, buffing the steel to a clean shine.
To keep your metal surfaces looking new, keep off using abrasive substances or steel wool for unconstipated clean and maintenance. Protect your stainless steel slump with a arctic cup of tea mat when washing arduous pots or cast iron. just be certain to remove the mat when finished washing up so that water system won ’ metric ton remain trap underneath, where it can cause discoloration . ad