How to Remove a Ring Doorbell | Digital Trends

Digital Trends may earn a commission when you buy through links on our site. Why trust us ? A Ring Video Doorbell is a commodious way to keep eyes on your house, whether you want to ensure the kids are home safe, or need to know if that software has been delivered. occasionally, you may need to remove your Ring Doorbell from your home for charging, care, or an ascent to a newer model. So how do you do it ?




10 minutes

What You Need

  • Ring Video Doorbell
  • Screwdriver included with the Ring Video Doorbell

Charging is the most common reason you might need to remove your Ring Video Doorbell from your home ‘s outside. While this wo n’t be necessary for the cable version, many of the double wired/wireless or battery-only powered doorbells do need charging every few months, depending on how much action they see in a day .
It will normally take several hours to amply recharge a wholly depleted battery. Remove the battery from the whole, bring it inside, connect it to the micro-USB cable that comes with the device to recharge it, then reinstall it. If you need to learn how a Ring Video Doorbell works, read our guide .
amazon ring blink smart home deal best buy cyber monday 2021 video doorbell installation

How to remove Ring Doorbell to charge

Each Ring Video Doorbell comes with a obliterable faceplate that has a security screw holding it in identify to prevent larceny. There is a special screwdriver included in the software that will allow you to properly remove the screw .
Step 1: Use the screwdriver to remove the security fuck, which is about always located at the bottom of the unit .
Step 2: Once the screw is out, you should be able to pull the bottom part of the faceplate down and toward you.

Step 3: When the faceplate comes off, you will see the buttocks border of the battery compact and a small silver lever. press on the lever and the battery should drop straight out the buttocks, then get ready to catch it .

How to remove Ring Doorbell without the special tool

It happens : You lost that bantam orange screwdriver that comes with your Ring Video Doorbell. What can you do ? You ’ ve got a couple of options .
If you ‘ve got some prison term, consider reaching out to Ring ‘s customer support team and inquiring about a refilling. several users have shared that Ring can issue a surrogate if needed .
Step 1: If you need to charge the barrage now, try to gently manipulate the screw ( while being very careful not to strip it ) using a identical minor flathead screwdriver. A T15 Torx head screwdriver should besides work .
Step 2: Follow the steps for removing a Ring Video Doorbell above .

How to remove Ring Video Doorbell permanently

If you are relocating or replacing your Ring Video Doorbell, you may want to permanently remove it from your door frame. fortunately, this is not difficult .
Step 1: Use the security screw cock to remove the faceplate .
Step 2: You should see a couple of screws holding the doorbell to the door frame or rampart. Simply remove those screws and the doorbell will come correct off .
Step 3: Do n’t forget to add a few drops of silicone or filler into the holes so you do n’t get bugs or leaks .
That ’ s how you can remove a Ring Video Doorbell from your home, for alimony, charging, or to start fresh. ready to get a newly model ? Check out our Ring Video Doorbell buying guidebook for advice. then read our article on how to install a Ring Doorbell .

Editors’ Recommendations

Related Posts

Leave a Reply

Your email address will not be published.