Reading: How To: Paint Wood Wall Paneling
That may be easier said than done, partially because solid-wood panel so often has knots, the kind that appear invincible to paint coverage and leave the well-intentioned homeowner feeling a morsel trigger-shy. Just as much, there ’ s a wax or varnish to deal with, and do-it-yourselfers know that sanding can be not only taxing but very messy. And then there ’ s veneer wood panel : Isn ’ triiodothyronine there something about its hard, about plastic-like coat that looks like it merely wouldn ’ t take paint very well ? RELATED: How To—Paint EVERYTHING The truth is that, careless of whether yours is solid or veneer, it ’ mho pretty easy to paint wood empanel. If you ’ ve ever painted a firearm of wood furniture, then you ’ re probably already conversant with the basic steps that make up the process—though there are a few differences, like protecting neighboring walls and trim or account for the grooves of paneling. Follow these key guidelines for how to paint woodwind panel and you ought to achieve professional-level results .
- Clean the wall paneling with diluted TSP.
- Lightly sand the wood surface.
- Ready your work area.
- Apply two thin coats of stain-blocking primer.
- Apply at least two thin coats of paint.
For fully details on painting wood wall paneling, continue reading below .
STEP 1: Clean the wall paneling with diluted TSP.
Any dust, scandal, or buttery fingerprints can prevent the rouge from sticking good to the wood panel, so start by thoroughly washing the wood-paneled walls with a solution of trisodium phosphate ( TSP ) and water. Before you tied pick up a leech to begin using this toxic clean, put on protective gear—full-sleeve dress, rubber gloves, glasses, and a respiratory mask—and open windows in the room to adequately ventilate. then, dilute TSP in a bucket of water and wipe down the woodwind paneling with a leech dampened in the solution .
STEP 2: Lightly sand the wood paneling.
future, proceed to lightly sand the walls using a proficiency competently known as “ scuffing ” ; the goal here is to create a estimable mechanical chemical bond between the paneled wall and the initial coat of fuse that you will soon be applying. You ’ ll use a 220-grit emery paper in tied round motions to do so. ad today ’ s primers are so good that you can credibly skip the sandpaper, but I think it ’ s worth doing. even though it takes only 20 or 30 minutes, scuffing gives you durable policy against chipping paint. equitable be certain to wear a dust mask and, for health reasons angstrom well as cleanliness, wipe away debris with a sheet fabric or dampen tabloid as you go. ( nowadays may besides be the meter to vacuum the deck so that you don ’ metric ton traverse dust room to room. )
STEP 3: Protect the floor from paint splatter using drop cloths and painter’s tape.
Save yourself from having to scrub errant paint drips and splatter off the floor after the key job is accomplished by laying down a crowd of old newspaper or a dribble fabric. If there is molding or ceiling that you do not want the paint to unwittingly color.
STEP 4: Apply two thin coats of stain-blocking primer.
Having finished scuffing the fully width and stature of the wood panel to be painted, give the coat its initial coat of fuse to prevent any of the woodwind granulate, imperfections, and the like from showing through the concluding coat of paint. Choosing the good primer is key. For solid wood, use a water-based intersection ; for veneer, use a shellac-based one. While it ’ s not strictly necessary to do indeed, you can have the primer tinted to match the shade you finally plan to paint the wood panel. One contingent you absolutely should look out for ? The words “ stain-blocking ” on the pronounce. This trait helps hide any knots that appear throughout the wood panel, or else you may see them bleed through your weekend rouge job erstwhile in the future. Start in with a 2-inch high-quality angle girdle brush to cut in at corners, then keep it handy to dab off drips as you work. ad Since you ’ ll be covering such a big surface, switch to a roller for the rest of the key job—you ’ ll still be able to coat the grooves of empanel walls good fine. In holy order to avoid ending up with the orange peel–like texture that roller-applied paints sometimes produce, opt to use a foam sponge roller cover ( it ’ mho cheap and easily purchased at your local key supply store or home improvement center ). Two thinly fuse coats are normally sufficient. Check your can of primer for instructions on precisely how hanker to wait between coats .
STEP 5: Apply at least two thin coats of paint.
top with your chosen paint applied in the same manner as described in Step 4. While you ’ rhenium rolling on the paint in thin layers, pay close attention to how much collects in the panel grooves and wipe out any excess that might be excessively thick and become brassy once dry. lightly sand the surface between coats, and expect to do two or three in entire ( leaving adequate dry time between each ). It ’ ll be a weekend project for certain, but, when you finish, you ’ ll surely admire the difference painted wood empanel can make in a room ! Whether you ’ ve choose to paint wood paneling a lighter tinge to for a very aeriform farmhouse vibration or a felt total darkness for something cozier and more dramatic, like a library, the fresh color will decidedly deliver results.
Do n’t want to do it yourself ? Get release, no-commitment estimates from pro painters near you .Find local painters +