Let ’ s get into how to do it .
note : This folding method is typically done with A4 paper. A4 paper is standard printer paper throughout much of the world, including Europe and Asia. This newspaper is slightly longer and more narrow, so we ’ ll first need to trim down a plane of standard 8.5″ x 11″ to make this one exercise .
Step 1: Cut to Size
Remove a half-inch of paper from the long side of your letter .
Step 2: Fold in Half
With the long side on top, fold in half left to right and then unfold. The idea is to create a center fold .
Step 3: Fold Down Corners
Fold the clear mighty corner toss off to the center wrinkle and then duplicate with the peak left corner .
Step 4: Fold Bottom Up
Fold the bottom of your letter up to meet the foundation of the triangle you just made .
Step 5: Fold Bottom Up Again
Fold the bottomland up again, along the lineage that separates your bottom rectangle from the top triangle .
Step 6: Fold the Top Down
Fold the tip off of your triangle down to meet the buttocks edge .
Step 7: Fold the Sides
Fold the sides in to create a square boundary to your envelope. I ’ ve added a scatter line on the justly to show where to make the close up. reprise on the other side .
Step 8: Fold Tabs Up
Take the pill you folded over in Step 6 and fold it up so that the wrinkle production line is roughly perpendicular to the line of your triangle piece. It should be slenderly less than square to the short-circuit side of your envelope.
Read more: How To Do a Smokey Eye
reprise with the early side .
Step 9: Finish It Up
Lift up your triangulum flap and then fold it back down over your tabs and under the beat at the base of your envelope.
envelope with Beveled Corners
note : This style works fine with convention 8.5″ x 11″ printer newspaper. No pare is necessity .
Step 1: Fold in half.
With the retentive slope on acme, fold your letter in one-half left to right, then unfold .
Step 2: Rotate and Fold Corners
Rotate the letter 90 degrees, so the short side is toward you. Fold the top correct corner about to the middle of the foliate, where your seam is. The goal is to have this fold stop about a half-inch away from the center furrow. repeat with the inverse corner .
Step 3: Fold Sides
Rotate so that the long side is once again at the top. Fold the peak down toward the center, leaving a half-inch col between the edge of your close up corner and the pen up side. duplicate with the penetrate boundary .
Step 4: Fold Corners In
You should now have two square corners that are opposite to each early. Take one square corner and fold it to the diametric side of the letter so that the edge matches up with the middle kris of your composition. As you fold, lift the long flap and tuck the corner under.
repeat with the other straight corner. You should have two tucked-in corners, and you ’ re done !