Reading: How to Build a Compost Bin
All cuts are true, and the bin is simple to meet
$100 to $200
If you love to garden, nothing feeds your plants better than compost from your identical own backyard, and its price ( barren ! ) is impossible to beat. But the down itself is n’t precisely an attention-getting feature .
Though you can buy a compost bin made from budget-friendly credit card or even wimp wire, a wood bin, typically made of rot-resistant cedar, will conceal those cubic yard clippings and kitchen leftovers without sticking out like a huffy thumb on your landscape.
The gaps between the wood slats let vent circulate around the pile to keep odors at bay and ensure that wastes are breaking down ; obliterable slats, presence panels, or doors make it easily to turn the stack and remove compost when it ‘s quick to spread. Follow our cedar compost bin plans to make a rustic little structure that will help you keep your yard thriving year-round .
Shown: Compost bin : ECO Composter by Exaco, $ 130 ; europeangarden.com. Compost bucket : Copper-finish compost pail, $ 35 ; gardeners.com
Compost Bin Overview
The bin pictured was fashioned from wood thermally treated to make it weatherproof and rot-resistant, but you can besides build one from stock cedar lumber .
How to Build a Compost Bin
1. Cut Lumber to Size
- Using the dimensions shown, cut 1×4 lumber to make 24 horizontal slats, 8 vertical legs for the corners, 8 slats for the lid, and 8 battens for the lid and slide-in panels.
- Cut a 1×4 to the bin’s height, and rip it in half to make rails for the slide-in tracks.
2. Make the Back and Sides
- For the back of the bin, lay two legs on the flat and attach six slats across them with 1 1/8-inch screws, placing the ends of the slats ¾ inch from the outside edges of the legs.
- Be sure to leave a ¾-inch gap between each slat as well. (Use a 1×4 turned on its edge as a spacer.) Make the sides the same way.
3. Make the Slide-in Panels
- For the lower panel, secure three slats spaced ¾ inch apart to two battens spaced 1 5⁄8 inches from the ends of the slats.
- Make the upper panel in the same manner, but be sure its battens extend ¾ inch past the bottom slat to create the gap between the slats.
4. Assemble the Bin
- Using an adhesive such as Gorilla Wood Glue, glue and screw the sides of the bin to the inside edges of the back legs so that the legs form the back corners.
- To create the slide-in tracks for the front panels, attach the rails to the slats on the inside front edges of the side panels, flush with the ends of the slats.
- Glue and screw (with 2-inch screws) the remaining legs to the front edges of both sides to form the front corners. Slide the front panels into the tracks.
5. Make the Lid
- Attach battens to four boards so that they’re flush with one edge and 2½ inches short on the other. Repeat for the second half of the lid.
- Flip the pieces over and top your bin; it will have a 1-inch overhang all around.