Descale a Keurig Coffee Maker With Vinegar – How & Why | One Cup Report

Ughhh ! The de-scale light on the Keurig has come on. now what ?
It may be time to descale your Keurig chocolate manufacturer with vinegar .
This position will discuss how and why to use vinegar for descaling your coffee maker.

Before we get into it… You may have seen the scale light on some Keurig models and wondered what that is for. That unhorse will tell you when the scale has built up to a horizontal surface where it may affect the operation of your brewer .

Scale buildup inside your Keurig – what is scale buildup?

There are minerals are in your water, even city water, and are normally there even after filtration. Some minerals may hush be there even after going through a water system softening process .
The minerals are suspended in the water molecules and they leech out of the water system when coming into reach with metallic element components, like the fittings, fastball tank car and pump in your Keurig brewer. These bleed minerals cling to the metal surfaces ( and some early types of surfaces besides ). This mineral buildup is called scale .
It actually doesn ’ thyroxine matter what type of body of water you have – city water, well urine, filtered water – even bottled water can allow for mineral and scale buildup. Of course, some water is worse than others .

Why does scale cause problems in Keurig coffee makers?

scale is not toxic and any buildup should not actually change the taste of your chocolate. But, the buildup does have a tendency to plug up the lines in your machine .
As scale leeches out of the body of water and clings to some surfaces, normally metallic element surfaces, inside your Keurig chocolate manufacturer, the minerals besides build on top of other mineral buildups. The scale just keeps construct and construction until a fitting or cable becomes plugged up or – the buildup can sternly slow down the water stream through the brewer .
scale does not broadly build up on plastic surfaces, glass surfaces, porcelain surfaces, and some types of alloy surfaces. In your Keurig brewer, it does buildup in the heater tank and the fittings connecting to it .
The build up in the heater tank will reduce the potency of the heat unit but it can however function very well. It is the scale buildup in the fittings connecting to the fastball unit that causes the most trouble .
And not equitable the scale buildup in the heater fittings, but besides in the pump and pump fittings .
These mineral buildups can besides happen in the fixtures and pipes in your home, which is why many people have water softeners, to reduce the scale buildup in their pipes caused by minerals in their water .
Smaller body of water lines and regular openings will plug up quicker than larger pipes. so, for your coffee manufacturer with smaller lines and openings – left untreated, this will cause the early death of your brewer. Which is why Keurig recommends frequent scale .

The mineral dilemma. Do you want minerals in your coffee maker?

purify water does not have any mineral message. Wouldn ’ t it be the legitimate choice for your coffee bean brewer ?
You would think so, but Keurig does not recommend using distill water system. Why ? Because of taste .
Minerals in urine taste better and for that reason Keurig recommends bottle mineral water and water that is not softened .
Better tasting water means better tasting chocolate.

Therein lies the dilemma .
Do we want minerals in our water running through our coffee brewer with better tasting coffee and then have to descale ?
Or do we sacrifice the sample of our chocolate and reduce or eliminate scale buildup in our coffee godhead ?

If you want great tasting coffee, you must allow for minerals in the water and get used to descaling your coffee brewer.

Symptoms of scale buildup in your coffee brewer.

Of course, one symptom of besides much scale buildup would be the “ De-Scale ” idle on your Keurig comes on .
But before that, the most common symptom is slower water system stream. It simply takes longer for your Keurig chocolate manufacturer to brew a cup of coffee .
sometimes this is very obvious. The pump struggles and makes more randomness while less brew coffee comes out .
To know for sure if it is water flow and not faulty coffee pods or other obstructions caused by the coffee filter part of the brewer, you should do the following:

  • Remove any K-cup pods.
  • Make sure the top needle (the one that pierces the top of the K-cup) is unobstructed by cleaning it using the paper clip method.
  • Remove the K-cup pod holder (it does come out)
  • Run your Keurig brewer without the pod holder and without a K-cup pod, leave the pod holder empty.

If you get good body of water flow after doing this, then the scale buildup is probably not excessively badly. It hush does not hurt to descale frequently even if you have good water system menstruation .
If your Keurig brewer has inadequate water flow, the pump struggles, and water dribbles out – you need to descale your brewer .

Descaling your Keurig brewer

The Keurig way…

You can use the Keurig sword recommended descaler and procedure which they outline very well .
Keurig has instructions on how to descale every brewer and those instructions can be found in the manual that comes with each machine. You can besides find step by step instructions for all their stream brewers on the Keurig web site. Some instructional videos were besides made by Keurig on descaling adenine well .

Descale a Keurig coffee maker the white vinegar way…

Or, you can besides use white vinegar to descale your Keurig machine. We should mention this is NOT recommended by Keurig and may void your guarantee .
besides we have added some steps that Keurig seems to overlook in the scale process .

Step by step

  • Empty the water reservoir on your Keurig. [If you have a small pour-in reservoir, these instructions will be different but the process is the same – 50/50 water to white vinegar].]
  • Remove any filter and filter unit kit from your reservoir if you have one installed.
  • Fill a large coffee cup (about 10 oz) with distilled white vinegar and pour it into your reservoir. Do this twice (20 oz of vinegar total) for non pour-in type reservoirs – the removable type.  ****It is critical that you use distilled white vinegar! *** DO NOT use any other type of vinegar like apple cider vinegar or balsamic vinegar – as those can put sediment, debris and gunk into your brewer.
  • Fill that same large coffee cup with clean water you would normally use for brewing your coffee. And do this twice also for non pour-in type units, so that you have equal parts white vinegar to water – 50/50.
  • Place the reservoir back on the brewer, and make sure your Keurig brewer is powered on.
  • Empty the K-cup pod holder – do NOT place a pod in the holder, leave it empty.
  • Place an empty cup (10 oz) and brew a 10 oz size cup. Do this until the brewer says to add water. You should be able to smell the vinegar in the last cup you were able to run through before the water in the reservoir runs low and you get the add water indication.
  • Now let it set at least 30 minutes. You really should let it sit for an hour if you can. The longer it sits the more scale the acidic vinegar will dissolve from the machine. Don’t let it sit for more than 3 hours.
  • If you want, you can even repeat this whole process up to this point again.
  • After letting it sit with the vinegar solution, empty the water reservoir and this time fill it with clean water. Run as many cups through the machine as necessary without using a pod until needing to add water.
  • As you do this, each cup of water that is run through should smell less and less of vinegar. If you still smell vinegar, fill the reservoir again with clean water and repeat this process until there is no vinegar aroma.
  • You are now ready to brew coffee as you normally would.

Why white vinegar works for descaling single serve coffee makers.

vinegar is acidic, an acidic, and it literally dissolves away minerals ( and even metals, but more slowly ). White vinegar is not a strong acidic, and mixing it with urine dilutes it even more. so this solution should not be harmful to your machine.

Most acids do not affect plastic tube and they have less effect on clean metals, like the fastball and tank car in your Keurig chocolate maker. But, acids do have a dramatic effect on scale buildup, the minerals .

Which is better? The Keurig recommended way or using white vinegar for descaling?

In the Keurig recommended cleaning march they suggest using a combination of their scale solution and water, about a 50/50 combination.

After some research, we did come up with the basic ingredients of the Keurig descaling solution. What are they ?
short answer : citric acid, Silicic acid, Phosphates, Bleaching Agents, and Water .
by and large, Citric Acid, about 50 % or more. That means that more than half the solution is made up of citric acerb. It ’ s a big scale agent and is natural .
Silicic Acid, approximately 3 %. Less than 3 % of the solution is silicic acid. Silicic acerb is “ a weakly acidic colloidal hydrated imprint of silica made by acidifying solutions of base alloy silicates. ” This in truth acts as a stabilize agent .
Phosphates and Bleaching Agents, about 5 %. Phosphates are a salt or ester of phosphorous acerb. phosphorous acids are used to enhance relish in foods and are considered harmless. This and other bleach agents are combined as the clean ( not descaling ) agents included in the scale solution .
And the rest… water .
Keurig claims their solution will descale, remove calcium and other scale ( mineral deposits ) that may build up inside of the brewer inner parts and tank car .
Keurig besides makes no claims on their web site that their scale solution is all natural or non-toxic. Some of the bleach agents may be toxic. And the phosphates are not very desirable either .

Keurig way pros…

  • This is the Keurig recommended method
  • Effective

Keurig way cons…

  • Expensive – the Keurig solution is somewhat costly
  • Unwanted chemicals and chemical residues

The descale a Keurig with distilled white vinegar pros…

  • Natural – no chemical residues
  • Effective
  • Cheap – distilled white vinegar can be purchased very inexpensively.

The descale a Keurig with distilled white vinegar cons…

  • May void Keurig warranty – not recommended by Keurig

Preventing and avoiding scale buildup in your Keurig coffee brewer.

We coverd how and why we should descale a Keurig with vinegar. Is there anything you can do to avoid scale buildup ?
Yes, use bottled distill water. But, as we already mentioned in this post, this may make your coffee not sample vitamin a good as it could with minerals in the water system .
You can besides try using bottle jump water system, which has the minerals for a better tasting cup of coffee but less of the minerals that cause scale buildup. And using spring water is recommended by Keurig .
You can besides use softened water. dampen water does have less mineral contentedness, but more salt content. The combination of more strategic arms limitation talks with less minerals doesn ’ t help the taste of the body of water or your cup of coffee bean .
You can filter your body of water. many water filters can take out some minerals and other chemicals in the water, like chlorine, cast-iron, etc .
Depending on the kind and type of filter, you can get identical clean water with some mineral contented and a better taste body of water. This results in a better tasting cup of chocolate with less scale buildup in your Keurig coffee manufacturer. It will reduce the scale buildup, but not eliminate it .
For example, an under-sink or countertop inverse osmosis system is fairly easy to install and does a great job of providing clean, beneficial taste water. Some of these systems are besides very sanely priced .
Besides changing the water you put into your brewer, all you can do is scale frequently .

What you should NOT DO when cleaning or descaling your Keurig – don’t do this…

We powerfully suggest that you avoid any of the follow :
Using very dirty or cloudy water in your Keurig – who would do that ? you want to use clean water in your chocolate godhead .
Using senior high school mineral or iron content water system in your Keurig – which can equitable make the scale buildup worse than normal .
Using family, chemical cleanse agents in your Keurig – they leave behind potentially toxic chemical residues and can cause undesirable tastes and aromas in your chocolate .
Using detergents in your coffee bean maker – they leave residues causing unwanted tastes and aromas in your chocolate .
Using Lime Out or other family descaling products in your Keurig .
Using alchohol in your brewer – this may be an explosion hazard ! ! Yes, very ! !
Using any commercial acids, like muratic acid .
Using just any kind of vinegar ( besides distilled white vinegar ), like balsamic vinegar, or apple cider vinegar ( excessively much residue ) .
flavor enhancers, like substantive oils – which can build up inside your chocolate brewer .
If you liked this post on descaling your Keurig chocolate maker, you may like this post…

How To Sanitize and Disinfect Your Keurig Coffee Maker – Get It Really Really Clean

Related Posts

Leave a Reply

Your email address will not be published.