Connect a Printer to an iPhone | Square Support Center – US

Connect a Printer to an iPhone

Connect a confirm printer to the Square Point of Sale app on your compatible iPhone or iPod Touch. If you have any connectivity issues after following the steps below, learn how to troubleshoot your printer. once your receipt printer is connected, learn more about printing receipts and order tickets .
Before you get started, ensure your iPhone or iPod touch is compatible with Square .

Connect Ethernet Printers and iPhones

To get started :

  • Make sure your printer has an Ethernet Interface. You can order swappable interfaces, but be certain to request the Ethernet joining character on your printer.
  • Locate your Wireless router with an Ethernet Port .
  • Make sure you have a impregnable Wi-Fi signal .
  • Check that your reception printer and io device are connected to the like Wi-Fi net .
  • Check your device permissions that Square can access your local network. Toggle ON for Local Network in your device Settings > Square > Local Network to enable access, then relaunch the Square app .

To connect your Ethernet Interface printer :

  1. Connect one end of the Ethernet cable into the rear dialog box of the printer, and plug the other end of the cable into the wireless router ’ s Ethernet port .
  2. From the Square app, tap More > Settings > Hardware > Printers > Create Printer Station .
  3. Select Printer and select your printer .
  4. Tap Print Test to confirm that your device and printer are connected .
  5. In the section Use this printer for, toggle on what you ’ d like to print depending on your needs : Receipts, In-person order tickets, Order ticket stubs and Void tickets .
  6. Tap Save .

Learn more about creating printer stations .
To connect more than one iPhone/iPod equal to the one Ethernet printer, repeat these steps with each mobile device. If you ’ d like to use one iPhone/iPod tint with multiple printers, follow the same steps above for each printer .

Connect Bluetooth Printers and iPhones

To get started, make sure :

  • The battery is charged and the device is connected to an AC release .
  • compatible acknowledge paper is loaded .
  • The printer has been turned on .

For more information on the initial frame-up of the printer, refer to the manufacturer ’ s manual of arms for your model : star Micronics SM-S220i and Star Micronics SM-T300i .
To connect your Bluetooth receipt printer :

  1. Visit your io device settings. Tap Settings > Bluetooth > toggle Bluetooth on .
  2. Open the Square app and exploit More .
  3. Select Settings > Hardware > Printers > Create Printer Station.
  4. Enter a mention for your printer, and tapdance No Printer Selected .
  5. Select Connect a Bluetooth Printer and follow the on-screen instructions .
  6. once your printer is paired, return to the Square app and solicit Print Test .
  7. In the section Use this printer for, toggle on what you ’ d like to print depending on your needs : Receipts, In-person order tickets, Order ticket stubs and Void tickets .
  8. Tap Save .

Note: Bluetooth printers are only compatible with devices running the latest interpretation of Apple io .
Learn more about creating printer stations .

 Compatible Paper Width

On io devices, you have the ability to change composition roll size .
You can select the printer width through the Square Point of Sale app :

  1. Tap More > Settings .
  2. Tap Hardware and select the printer .
  3. Under Printer settings > Paper size, tap Change .

Note: Changing printer width to 40 or 58mm and then back to 80mm may cause damage to your printer. Check your printer manufacturer guidelines before you change Paper size .

Connect AirPrint Support on iOS

AirPrint defend on io helps the integration with any printer that supports Airprint protocol. You can now connect to popular Air print enabled kitchen and reception printers from POS like :
StarTSP654II, Brother QL-1110 and StarTSP847II .
Learn more about AirPrint .
To get started :

  1. From the Square app, tap More from the navigation bar at the bed of your blind .
  2. Tap Settings > Hardware > Printers > Create Printer Station .
  3. Enter a printer station name .
  4. Tap Printer then select printer.
  5. Click Connect AirPrint printer and choose your printer .
  6. Tap Save.

You are able to find your AirPrint printer saved, enabled and quick to be used from your Square app under Settings > Hardware .

Related Posts

Leave a Reply

Your email address will not be published.